My new used JP Super Sport PRO 118 freerace board - model 2009

I'm really not the most regular blogger. I just don't take time to write. So now I have decided to try a new approach. Shorter and more frequent posts ... and lets see how this works out for me.

Many things happened since my last post. I came across a used reasonably priced JP Super Sport 118l PRO board model 2009. This board is a blast ... it is light and super fast ... much faster than shark and I also enjoy it much more than shark.

Here is a link to a review in german language: http://www.surf-magazin.de/test_technik/test/boards/freerideboards/jp-australia-super-sport-69-pro/a1360.html

Tech. specs:

- Volume: 118 L
- Width: 69 cm
- Lenght: 250 cm
- Weight: 6,7 kg
- Fin: 42 cm G10 JP Freerace



I rode it only once with the 7,8 Challenger Fluido T3 sail. It was a great combo and was able to ride it well in overpowered conditions.

With the JP SS came also a mint 42 cm G10 fin which works well. My carbon 42 fin work even better but since I don't need two fins of the same size I decided to have carbon fin shortened to 38 cm and have it for 6,6 sail and use it also when riding overpowered wit 7,8. If I decide to sell the board I want to have original fin with it for the resale value.



Board has originally been damaged and repaired quite a few times but never took in any watter. Previous owner never had the graphics restored. Probably to keep reparation costs as low a possible, but I had it also repainted. It was done by CMD Mare. Guy does incredible job when repairing and restoring boards. He also does custom boards. Well now board looks really great. I'll try to post some images soon.

My first ride with Challanger Sails Fluido T3 6.6m2

After a long time there was finally a good wind-forecast for north Adriatic region. NE wind at Krk / Punat region was promising winds well over 20 knots. Saturday was the day. 

We, my girlfriend (also my camera girl :-)) and me have departed from Ljubljana somewhere before 6.00 AM. The highway to island Krk was opened recently so the ride wasn't that long. We were there before 9.00 AM which includes mandatory coffee break.

When we got there the wind was really great. On the water were mostly sails around 5m2. I really wanted to test my new Fluido T3 6.6, the smaller brother of the 7.8 which proved to be a splendid sail. So I set it up. 

This was the configuration:

• Mast:  Rushwind Strike SDM 430cm 85% Carbon CC
  this is an older mast model I managed to get last year. It was new and I got it really cheap.

• Mast extension:  North Sails Power XT (short) - yeah I bought me one :DI had one few years ago - sold it just to find out that I miss the option of easy and exact trimming.

• My good old Amex Core Monocoque Aluminum boom ...

I prepared my Fanatic Hawk 93 board with 31 cm fin ....

... and chickened out ... ha ha

I was watching guys on water which boiled at moments and decided that just maybe 6.6. sail is pushing it a bit. So I assembled quickly the Challenger Sails Konda 4,7 sail and went in. It was a good decision. I had some nice rides with it. It has been a while since I rode such small sail ... and it felt like a toy. After some time the wind had receded and I was just wading in the water with the 4,7. Now it was time to change to bigger sail :D ...

I just changed the sails quickly and went back in. Although the sail was a 6.6 I could handle it well when the wind picked up at 20-30 knots again. I had to really hang in there, pull it down as much as possible and then I was flying. 

While the sail was OK I had some problems with the board. It was way too agile. I was riding a 93l board with a free move 31 cm fin and free race/slalom sail. The problem was obviously in the fin. The hawk is known to have slalom capabilities but with this fin it was more of a free move board. Unfortunately I didn't have a slalom or free race fin in this size. I was riding this setup for the rest of the day. It was some workout. I felt every muscle and felt great at the same time :-)

This was the end of one great surfing day. 

Unfortunately not much later it started to rain so we decided to go home instead of doing some sightseeing. And the trip home turned out to be a travel of 6 hours due to traffic congestions on the highway and border crossing but ... that is another story ...

P.S.: And yes, later I will post a movie that my girlfrend took :)

Custom freerace fin for the Shark - Now it really bites :)

It was really a bad time to be without a fin since we intended to go on vacations soon. So I needed to find one fast. I was checking portals for a good used fin but could not find any, so I decided to buy a new one. All larger sails I have are freerace, so I decided to buy a freerace fin for the shark as was recommended in one of the test magazines (link to test).

I was looking at two fins - Select Free Slam 41cm and the MFC Freerace 40 cm. Both fins are available on powerbox. Both are also quite costly at around 119 EUR (retail price). 

            

The third option was a custom made carbon freerace fin. You would imagine that such a fin costs even more, but it is not so. We have a guy in Slovenia with extensive experience in fin design. BUG-FINS / www.bugfins.com. 


I contacted him and we exchanged a few e-mails about my knowledge and style of windsurfing and what kind of fin I would like to have. He offered to make me a carbon freerace fin for 90 EUR which was, as you can imagine, no brainer :) Fin was ready in a few days. Fin is incredibly light, narrow yet stiff enough. I couldn’t wait to test it out.

 Not original foto

My Fanatic Shark fin broke ...

Last time I told you that something happened to me while I was windsurfing in Seča but didn't just get to write about it. 

Well what happened is that my fin broke in the middle of the bay a good km away from shore. It broke just below the head of the fin. Luckily there were enough windsurfers on the water and I managed to get ones attention. He called for help a sailboat that was in the vicinity and they dragged me and my board to shore. 

I was thinking later on that this could as easily happen to me on a cold winter day or in stronger wind when there are not many windsurfers there. Wind direction there is away from shore! That is why I always wear a lifejacket and I'm thinking of talking also a mobile phone next time.

What could be the problem?

One possibility is that the fin was damaged before I bought it. It was a test board and we know that test boards are not handled with much care. I myself also had an accident when hitting a large branch that was floating on the water on one occasion. It could have caused invisible fracture to the fin. It could also be a construction error.

On the water all I really did was put the pressure on the fin after a small jump and it snapped...

Anyway I have contacted Fanatic and asked if they had any reported problems with this fin:

Here is their answer: http://2013.fanatic.com/forum_neu/read.php?1,22083

I bought a custom made carbon fin to replace the broken shark fin ... read my next post :)